網帶式超聲波清洗機是針對軸承行業套圈零部件、汽車、摩托車、 制冷配件、電器配件等五金行業的清洗。 隨著客戶對產品清潔度要求不斷提高、 清洗產量不斷增大，企業自身轉型升級、減員增效的管理需要，結合超聲波清洗、高壓噴淋清洗、內循環烘干等成熟工藝，針對清洗、烘干、防銹等要求，采用穩定的不銹鋼網鏈輸送形式，專業設計網帶式超聲波清洗組合線。特別適合于五金件成品零件的清洗。

The mesh belt ultrasonic cleaning machine is designed for cleaning hardware industries such as bearing ring components, automobiles, motorcycles, refrigeration accessories, and electrical accessories. With the continuous improvement of customer requirements for product cleanliness and the increasing cleaning output, the management needs of enterprise transformation and upgrading, as well as reducing staff and increasing efficiency, combined with mature processes such as ultrasonic cleaning, high-pressure spray cleaning, and internal circulation drying, stable stainless steel mesh chain conveying form is adopted to meet the requirements of cleaning, drying, rust prevention, etc., and a mesh belt ultrasonic cleaning combination line is professionally designed. Especially suitable for cleaning finished hardware parts.

網帶式超聲波清洗機主要結構

Main structure of mesh belt ultrasonic cleaning machine

采用不銹鋼網鏈傳動 ,無級變頻調速 ,可控制產 品清洗時間的長短和效率。

Adopting stainless steel mesh chain transmission and stepless frequency conversion speed regulation, the cleaning time and efficiency of the product can be controlled.

針對需要退磁的工件,采用裝有變壓器油的框式退磁器退磁。退磁后,殘磁量≤0.4mT ,保證了清洗效果。退磁器通過油循環冷卻+風冷形式,并在機內配備無功補償,達到節能降耗的效果。

For workpieces that require demagnetization, a frame demagnetizer equipped with transformer oil is used for demagnetization. After demagnetization, the residual magnetic flux is ≤ 0.4mT, ensuring the cleaning effect. The demagnetizer is cooled by oil circulation and air cooling, and equipped with reactive power compensation inside the machine, achieving the effect of energy conservation and consumption reduction.

可根據工件清洗的需要,設置超聲波清洗區、噴淋清洗區、風刀切水區、隧道式內循環烘干區、涂油區、上下料區等工藝模塊組合。

According to the needs of workpiece cleaning, process module combinations such as ultrasonic cleaning area, spray cleaning area, wind knife water cutting area, tunnel type internal circulation drying area, oil coating area, and loading and unloading area can be set up.

副水箱有 勞油裝置及PH值測試(水基清洗 )、聲光提示加清洗劑、 循環過濾系統、加溫系統(水基清洗 )、自動液位補償?shù)裙δ芸晒┻x擇,另有CDR油霧過濾器(機械式)廢氣處理系統可選配,以適應環保要求。

The auxiliary water tank has functions such as labor oil device and pH value testing (water-based cleaning), sound and light prompt for adding cleaning agent, circulating filtration system, heating system (water-based cleaning), automatic liquid level compensation, etc. to choose from. In addition, CDR oil mist filter (mechanical) exhaust gas treatment system can be optionally equipped to meet environmental protection requirements.

內循環烘干原理：清洗后的工件 自動傳送到烘干區域通過風泵產生高壓風經一級過濾裝置過濾后,風刀對傳送中的工件全角度的高溫風切吹干,能夠徹底 工件內外表面上的水滴。

Internal circulation drying principle: After cleaning, the workpiece is automatically transported to the drying area and high-pressure air is generated by the air pump. After being filtered by the primary filtering device, the air knife cuts and dries the workpiece at all angles with high-temperature air, which can completely remove water droplets on the inner and outer surfaces of the workpiece.

本文由全自動超聲波清洗機提供技術支持，更多的詳細精彩內容請點擊我們的網站http://www.jzjuhe.com，我們將會全心全意為您提供滿意的服務。

This article is supported by a fully automatic ultrasonic cleaning machine. For more detailed and exciting content, please click on our website http://www.jzjuhe.com We will wholeheartedly provide you with satisfactory service.